What are the requirements for cable reel handling
Crane is generally used for loading and unloading cable reel. The lifting commander must be * * * trained and obtain a certificate of qualification. During loading and unloading, a steel shaft shall be inserted into the central hole of the cable reel, and steel ropes shall be sleeved at both ends of the shaft for lifting. The center of some cable reels is the reel shaft, and grooves are set at both ends of the shaft, which can be directly sleeved with steel wire rope for hoisting. It is not allowed to thread the steel wire rope directly into the inner hole of the cable reel for lifting. When loading and unloading the cable reel, it is strictly prohibited to hoist several reels of cables at the same time. It is strictly prohibited to push the cable reel down directly from the transport vehicle. Smaller cables can be built into a slope with a wooden board, and then the cable reel can be pulled by a winch or rope to roll down the slope slowly. When manually handling short cables and other heavy objects, they must stand up and put down at the same time, and cooperate with each other to prevent damage. When going up the slope, the height of the person behind should be higher than that of the person in front, and vice versa when going down the slope.
- All models and descr…
- A simple method for …
- WDZ series low smoke…
- Technical specificat…
- WDZN-KYJY22 XLPE ins…

